Přesunout vlákno do jiné kategorie

Ahoj, kdo používáte STM32IDE ... včera jsem si nechal zaktualizovat IDE a nějak se od té doby peru s nahráváním programu do MCU přes Open OCD... Netušíte, kde hledat chybu?

Open On-Chip Debugger 0.12.0-00017-gb153daa14 (2023-02-03-14:58) [https://github.com/STMicroelectronics/OpenOCD]
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : STLINK V2J41S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.265392
Info : clock speed 4000 kHz
Info : stlink_dap_op_connect(connect)
Info : SWD DPIDR 0x0bc11477
Info : [STM32G071RBTx.cpu] Cortex-M0+ r0p1 processor detected
Info : [STM32G071RBTx.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for STM32G071RBTx.cpu on 3333
Info : Listening on port 3333 for gdb connections
Info : accepting 'gdb' connection on tcp/3333
Info : device idcode = 0x20006460 (STM32G07/G08xx - Rev B : 0x2000)
Info : RDP level 0 (0xAA)
Info : flash size = 128 KiB
Info : flash mode : single-bank
undefined debug reason 8 - target needs reset
Info : accepting 'gdb' connection on tcp/3333
undefined debug reason 8 - target needs reset
[STM32G071RBTx.cpu] halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x08002c6c msp: 0x20009000
[STM32G071RBTx.cpu] halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x08002c6c msp: 0x20009000
Info : dropped 'gdb' connection
[STM32G071RBTx.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x81000000 pc: 0x08008a30 msp: 0x20008fd0
shutdown command invoked
Info : dropped 'gdb' connection